Technical data

B-22 NetBlazer LS Configuration Worksheets 90362-01
Worksheet 19. Dial-in Character Mode User
To configure your local NetBlazer so remote character-mode users can dial in:
1. Set NetBlazer name and password (Worksheet 1) .
2. Select “Dial-in users” from the Main Menu screen and type a name for your user.
If you have more than one user, copy this page and fill out the fields shown with the
additional information for each dial-in character-mode user.
User name
This field is case sensitive.
3. Select “Character” for the connection type and fill in the appropriate fields on the
Character Mode User screen.
Password
This field is case sensitive.
Dial-out
❏
Yes
❏
No
Telnet/rlogin
❏
Yes
❏
No
Multi-login ❏ Yes ❏ No
Configuration
❏
Yes
❏
No
Status
❏
Yes
❏
No
Login command
This field is case sensitive. Use the semi-colon (;) to separate commands. For example,
rlogin
napa; logout
.
Your
Local
Network
Telephone
Network
Remote User