Technical data

B-20 NetBlazer LS Configuration Worksheets 90362-01
Worksheet 17. Dial-in IPX User
To configure your local NetBlazer so remote users can dial in and route IPX packets:
1. Set NetBlazer name and password (Worksheet 1) and configure NetBlazer LAN pro-
tocols (Worksheet 2, Worksheet 3, or Worksheet 4).
2. Select “Dial-in users” from the Main Menu screen and type a name for your user.
If you have more than one user, copy this page and fill out the fields shown with the additional
information for each dial-in IPX user.
User name
This field is case sensitive.
3. Select “IPX (PPP Shell)” for the connection type and fill in the appropriate fields on
the Remote IPX User screen.
Password
This field is case sensitive. If this user will be using PAP, you need to set this field. This
password needs to correspond to the PAP “peer-passwd” on the remote end.
Crypto Key
This field is case sensitive. If this user will be using CHAP, you need to set this field. This
crypto key needs to correspond to the CHAP “secret” at the remote end.
Your
Local
Network
Telephone
Network
Remote User