Technical data

90362-01 NetBlazer LS Configuration Worksheets B-17
Worksheet 14. Dedicated AppleTalk Protocol
To configure a dedicated connection so your local NetBlazer can route AppleTalk packets:
1. Set NetBlazer name and password (Worksheet 1) and configure NetBlazer
LAN protocols (Worksheet 2, Worksheet 3, or Worksheet 4).
2. Set up the interface as shown in the Dedicated LAN-to-LAN Interface
Worksheet (Worksheet 11).
3. On the Protocol Details screen, select “Routing details”.
4. Select “Enable AppleTalk”.
5. Once you know that the other end of the connection has been configured,
select “Learn AppleTalk routes”.
When you select “Learn AppleTalk routes” the NetBlazer dials the NetBlazer at
the other end of the link to learn its routing information. Allow up to three minutes
for this to be completed. You cannot proceed until this operation is complete.
Your
Local
Network
The
Remote
Network
Dedicated or
leased line
NetBla