Technical data

90362-01 NetBlazer LS Configuration Worksheets B-11
Worksheet 8. Dial-up IP Protocol
To configure a dial-up connection so your local NetBlazer can route IP packets:
1. Set NetBlazer name and password (Worksheet 1) and configure NetBlazer LAN
protocols (Worksheet 2, Worksheet 3, or ).
2. Set up the Interface as shown in the Dial-up LAN-to-LAN Interface Worksheet
(Worksheet 7).
3. On the Dial-up Connection screen, select “Protocol details”; if you go to the
Protocol Details screen, select “IP routes”.
4. On the IP Routes screen, type the address of a new IP route, then set that route’s
Public and Metric settings on the IP Route Details screen. Return to the IP
Routes screen if you want to add another route.
Route Address/Bits Public Metric (hops)
❏
default
❏
Yes
❏
No
______ . ______ . ______ . ______ / ______
❏
Yes
❏
No
______ . ______ . ______ . ______ / ______
❏
Yes
❏
No
______ . ______ . ______ . ______ / ______
❏
Yes
❏
No
______ . ______ . ______ . ______ / ______
❏
Yes
❏
No
______ . ______ . ______ . ______ / ______
❏
Yes
❏
No
Type “default” in place of a route number if you only need to add a single default route
for all the traffic from your network to the remote network.
If you have additional routes, copy this page and fill out the fields shown above with the
additional information. If you need more information on routing IP, see “IP Routing
Choices” on page 7-12.
Your
Local
Network
The
Remote
Network
Telephone
Network
NetBla