Technical data

90362-01 NetBlazer LS Configuration Worksheets B-9
Worksheet 6. ISDN
To configure your NetBlazer to route over an ISDN line:
1. Set your NetBlazer name and password (Worksheet 1).
2. Select “NetBlazer port setup” from the Main Menu screen.
3. Select “ISDN” from the NetBlazer Port Setup screen and work through the fields below
that apply to your ISDN line.
SPID values
bri011
bri012
__________________________________________
__________________________________________
Be sure to set the SPID numbers before selecting the switch type.
If you have a switch type of 5ESSB, you may not have SPID numbers. If you only get one SPID
number when you subscribe, you can set the SPID number on either bri line.
Switch type: ❏ 5ESSB ❏ DMS100B ❏ NI1B
If you want to save your configuration at this point, return to the Main Menu and select
“Save/Exit” to save.