Technical data

B-8 NetBlazer LS Configuration Worksheets 90362-01
Worksheet 5. Lines
To configure the lines attached to your NetBlazer:
1. Set your NetBlazer name and password (Worksheet 1).
2. Select “NetBlazer port setup” from the Main Menu screen.
3. Select “Line setup” from the NetBlazer Port Setup screen.
4. Select a line and work through the fields below that apply.
If you have more than one line you need to configure, copy this page and fill out the
fields shown below with the additional information.
Modem or TA
If the NetBlazer automatically detects a modem or TA, don’t change this setting.
Type ❏ sync ❏ async
Speed
Autoconfigure
❏
on
❏
off
❏
config
Login
❏
on
❏
off
Note
5. Move to “Reset line” and press the Spacebar to select “yes”. When you press
Return, the changes are applied to the line.
If you want to save your configuration at this point, return to the Main Menu and select
“Save/Exit” to save.