Technical data

90362-01 Getting Started 1-1
Getting Started 1
Use this manual together with the Worksheets in Appendix B,
“NetBlazer LS Configuration Worksheets” to install and configure your
NetBlazer for the type of system and applications you have. You should fill
out the Worksheets before you begin the configuration process.
NetBlazer Applications
In order to know which worksheets to fill out (or that your system adminis-
trator or service provider should fill out for you), you need to know which
protocols and which related applications you want to configure. Your
choices for configuring your local network and for setting up your applica-
tions are interconnected. The following diagrams describe some of the most
common NetBlazer configurations. See Appendix A, “Configuring for Mul-
tiple Protocols,” for information on configuring to route multiple protocols.
• LAN-to-LAN routing involves routing information from one local
area network (LAN) to another local network.
Figure 1-1. LAN-to-LAN Routing
A NetBlazer can work with more than one LAN interface to route
packets between Ethernet, AppleTalk, or Token Ring networks.
First
Local
Network
Second
Local
Network
NetBlazer LS