Technical data

9-10 Dial-In Users 90362-01
2. If you want to delete the currently selected user, move to the Delete
field and press Enter. You are asked if you really want to delete the
interface. If you type
y
, the user is deleted and you return to the
Dial-in Users screen, where you can choose another user.
3.
In the
Password
field, type the user’s password on their remote
workstation.
4. In the Call back field, type the user’s telephone number as it needs to
be dialed from your NetBlazer; for example,
9,1 [phone]
. If
you type a number in this field, when the user logs on to the
NetBlazer, the NetBlazer will disconnect and call the user back
using the number in this field.
5.
In the
Home zone
field, type the name of the user’s home zone. If
you indicate a zone in this field, the user automatically appears in
that home zone when calling in. If you do not indicate a zone for this
field, the user defaults to the NetBlazer’s home zone. See Apple
Computer’s Inside AppleTalk for more information on home zones.
6.
For
Time limit
, type the total number of minutes that the user can
remain connected to the NetBlazer before the NetBlazer automati-
cally disconnects. To set an unlimited number of minutes, type
unlimited
.