Setup guide

NetVanta 7100 Administrator’s Guide Modifying Existing Phones

5. Confirm that the phone model is correct.

6. Select

Apply to apply changes and return to the Edit User menu.

7. Scroll to the bottom of the

Edit User menu and select Apply.

8. Select

OK to accept the prompt and reboot the new phone so it will download the configuration

from the NetVanta 7100. (If the phone will be rebooted at a later time, refer to the steps provided in

Rebooting a Phone on page 41.)

Rebooting a Phone

Periodically, a phone may require rebooting to accept a new configuration or software update. The

quickest way to reboot a phone is to unplug the phone, wait a few seconds, and return the plug to its correct

port. Each phone model has key sequences and menu options that also accomplish this task. Refer to the

ADTRAN IP 700 Series Administrator Guide or the specific user guide for the ADTRAN/Polycom phone

model, available from www.adtran.com.

The reboot process may take a few minutes. The phone will cycle through multiple information screens on

the display until it completes by returning to the idle display. In case of problems, it may be possible to

restore normal phone operation without rebooting. Contact your system administrator before attempting to

reboot the phone.