Setup guide

Accessing and Navigating the System Menus NetVanta 7100 Administrator’s Guide

Accessing the System

Figure 1. AOS GUI Application Diagram

Factory Defaults

From the factory, the AOS GUI is enabled and ready to be accessed. The NetVanta 7100 is shipped from

the factory with a default configuration that includes the following:

Ethernet Interfaces (Port 1 to 24)

• Status: Enabled (activated with no shutdown)

• Speed: Auto

• Duplex: Auto

• Cable Type: Auto

• VLAN Membership: Trunk ports allowing all VLANs

VLAN 1 (Native VLAN for data)

• Status: Enabled (activated with no shutdown)

• IP Address: 10.10.10.1 /24

• HTTP Server: Enabled

VLAN 2 (Native VLAN for voice)

• Status: Enabled (activated with no shutdown)

• IP Address: 10.10.20.1 /24

• HTTP Server: Enabled

PSTN

Internet

Management IP Connection

VLAN 1: 10.10.10.1/24

Phone