Instruction manual

61200361L1-1E © 2002 ADTRAN, Inc. 97
CONFIGURING THE LAN INTERFACE IP ADDRESS
Introduction
When the NetVanta 2000 series is connected to an IP network, there are several IP parameters that must be
set in order for the unit to communicate with the network. These parameters are described in this DLP
along with the procedures for setting them.
Prerequisite Procedures
This DLP assumes the NetVanta 2000 series is connected to a PC and a browser session is active. Refer to
DLP-001 for more details.
Tools and Materials Required
• No special tools or materials are required.
To prevent electrical shock, do not install equipment in a wet location or during a
lightning storm.