Instruction manual

61200361L1-1E © 2002 ADTRAN, Inc. 87
SAVING THE CURRENT SETTINGS OF THE NETVANTA
Introduction
After making a configuration change in the NetVanta 2000 series, it is necessary to save the new settings to
non-volatile memory. If the changes are not saved, a power loss to the NetVanta 2000 series will result in a
configuration loss. This DLP details the process for saving settings to NetVanta 2000 series non-volatile
memory.
Prerequisite Procedures
This procedure assumes that the NetVanta 2000 series unit is connected to a PC with an internet browser
and is powered up. Refer to DLP-001 for instructions on connecting the PC to the NetVanta 2000 series
LAN port and logging in to the NetVanta 2000 series system.
Tools and Materials Required
• No special tools or materials are required.
To prevent electrical shock, do not install equipment in a wet location or during a
lightning storm.