Instruction manual

Section 5, DLP-001 NetVanta 2000 Series System Manual
78 © 2002 ADTRAN, Inc. 61200361L1-1E
DLP-001
Perform Steps Below in the Order Listed
1. Connect power to the NetVanta 2000 series using the provided wallmount power supply.
2. Connect the NetVanta 2000 series LAN interface to the PC using the provided ethernet crossover
cable.
3. Supply power to the PC and begin the operating system bootup process. During the bootup process,
the PC will obtain an IP address from the NetVanta 2000 series DHCP server. Alternately, complete
the process for releasing and renewing captured IP addresses to obtain a new IP address from the
NetVanta 2000 series DHCP server. Please refer to your specific operating system documentation for
your PC details on that process.
4. Open your installed browser and in the URL field enter 10.10.10.1. The NetVanta 2000 series login
screen will appear.
5. Enter your username and password and click the login button. When connecting to the NetVanta 2000
series for the first time, the username is admin and there is no set password.
ADTRAN strongly recommends immediately changing the admin password for security
purposes. Refer to DLP-002 for details.