Instruction manual

NetVanta 2000 Series System Manual Section 4, User Interface Guide
61200361L1-1E © 2002 ADTRAN, Inc. 53
> POLICIES > MANAGE LISTS > SCHEDULE > OPTION 1, 2, 3
The O
PTION
(1-3) field allows you to define up to three distinct time windows in a week.
> POLICIES > MANAGE LISTS > SCHEDULE > WORKING DAYS
The W
ORKING
D
AYS
drop down menus define the start and end days of the time interval for the selected
option.
> POLICIES > MANAGE LISTS > SCHEDULE > OPEN HRS AND MINS
The O
PEN
H
RS
& M
INS
drop down menus define the beginning of the time interval in hours and minutes on
each week day configured in the
W
ORKING
D
AY
s field.
> POLICIES > MANAGE LISTS > SCHEDULE > CLOSE HRS AND MINS
The C
LOSE
H
RS
& M
INS
drop down menus define the end of the time interval in hours and minutes on each
week day configured in the
W
ORKING
D
AYS
field.
> POLICIES > MANAGE LISTS > NAT
The NAT table is displayed by clicking on the NAT hyperlink shown as a Manage Lists submenu in the
option list on the left side of the display window.
To add a new NAT filter scheme to the NAT table, click the
A
DD
button found in the NAT Configuration
dialog box. The NAT Configuration page is displayed. A discussion of the fields on the NAT Configuration
page follows.
> POLICIES > MANAGE LISTS > NAT > NAT NAME
The NAT N
AME
field defines an alphanumeric string (up to 20 characters) assigned to this NAT content
filtering scheme.
> POLICIES > MANAGE LISTS > NAT > MANY TO ONE MAPPING - FROM LAN POLICY
Many to One Mapping configures the NetVanta 2000 series to use the defined NAT parameters on all
traffic associated with the particular From LAN policy that references the NAT record. To NAT all policy
specific traffic to a specific public IP address, enter the IP address in the
NAT IP A
DDRESS
field. To NAT
all policy traffic to the IP address associated with a particular interface, select the interface name from the
Dynamic Interface drop down menu. Enabling NAT on the From LAN policy and selecting the NAT name
from the drop down menu will activate the NAT configuration.
> POLICIES > MANAGE LISTS > NAT > MANY TO ONE MAPPING - TO LAN POLICY
Many to One Mapping configures the NetVanta 2000 series to use the defined NAT parameters on all
traffic associated with the particular To LAN policy that references the NAT record. To Reverse NAT all
policy specific traffic to a specific private IP address, enter the IP address in the
NAT IP A
DDRESS
field.
Enabling NAT on the To LAN policy and selecting the NAT name from the drop down menu will activate
the NAT configuration.