Manualshelf

Instruction manual

ManualsBrandsADTRAN ManualsComputer equipmentNetVanta 160
51525354555657585960
Section 4, User Interface Guide NetVanta 2000 Series System Manual
52 © 2002 ADTRAN, Inc. 61200361L1-1E
> POLICIES > MANAGE LISTS > IP ADDRESS > ADDRESS CATEGORY
The A
DDRESS
C
ATEGORY
field configures the IP address group to be an IP R
ANGE
, an IP S
UBNET
, a S
INGLE
IP address, or
A
NY
IP address.
An IP
R
ANGE
is a set of IP addresses defined by start and end addresses. To add an IP R
ANGE
, enter the start
IP Address in the
IP A
DDRESS
1 field and the end address in the IP A
DDRESS
2 field.
An IP
S
UBNET
is a set of IP addresses defined by a network address and subnet mask. To add an IP S
UBNET
,
enter the network address in the
IP A
DDRESS
1 field and the subnet mask in the IP A
DDRESS
2 field.
> POLICIES > MANAGE LISTS > SERVICES
The Services table defines the transport protocol options and configuration parameters. The Services table
is displayed by clicking on the
S
ERVICES
hyperlink shown as a Manage Lists submenu in the option list on
the left side of the display window. Refer to DLP-016, Adding a Service to the Services Component Table
for more details.
> POLICIES > MANAGE LISTS > SERVICES > SERVICE NAME
The S
ERVICE
N
AME
field defines an alphanumeric string (up to 20 characters) used as the display name for
the service.
> POLICIES > MANAGE LISTS > SERVICES > PROTOCOL TYPE
The P
ROTOCOL
radio button allows you to define the transport protocol used by this service.
> POLICIES > MANAGE LISTS > SERVICES > SERVICE PORT
The P
ORT
N
UMBER
field defines the port number used by this service.
> POLICIES > MANAGE LISTS > SCHEDULE
The Time Schedule table is used to define weekly time schedules to use when defining policies. To display
the Time Schedule table, click on the
S
CHEDULE
hyperlink shown as a Manage List submenu in the menu
list on the left side of the display window.
To add a new time schedule record to the Time Schedule table, click the
A
DD
button in the Time Schedule
dialog box. The Time Window Configuration page is displayed. A discussion of the fields listed on the
Time Window Configuration page follows.
> POLICIES > MANAGE LISTS > SCHEDULE > WINDOW NAME
The W
INDOW
N
AME
field defines an alphanumeric string (up to 20 characters) used as the identifying name
of the time schedule record.
To add a
S
INGLE
IP Address, enter the specific address in the
IP A
DDRESS
1
field.