Instruction manual

NetVanta 2000 Series System Manual Section 4, User Interface Guide
61200361L1-1E © 2002 ADTRAN, Inc. 49
> ADMIN > UPGRADE FIRMWARE
The NetVanta 2000 series firmware may be upgraded using the U
PGRADE
F
IRMWARE
page. Refer to
DLP-008, Upgrading the Firmware of the NetVanta 2000 series for more details.
> ADMIN > CONFIGURATION TRANSFER
The NetVanta 2000 series supports configuration transfers from the unit (via either the LAN or WAN
interface) using an active browser session.
> ADMIN > CONFIGURATION TRANSFER > CONFIGURATION DOWNLOAD
The NetVanta 2000 series configuration can be saved to a file by clicking on the D
OWNLOAD
button in the
C
ONFIGURATION
D
OWNLOAD
dialog box under C
ONFIGURATION
T
RANSFER
. The W
INDOWS
D
OWNLOAD
dialog
box will appear, indicating that you have chosen to download a .bin file from this location. Select
S
AVE
THIS FILE TO DISK
and click OK. When the W
INDOWS
S
AVE
A
S
dialog box appears, enter the filename and
select the location in which to store it. Click the
S
AVE
button. A W
INDOWS
D
OWNLOAD
C
OMPLETE
dialog
box will appear, indicating the download is complete and the file has been saved. Click on
C
LOSE
. Refer to
DLP-009, Saving the Current Configuration of the NetVanta for more details.
> ADMIN > CONFIGURATION TRANSFER > CONFIGURATION UPLOAD
A configuration can be uploaded into the NetVanta 2000 series by choosing the C
ONFIGURATION
U
PLOAD
dialog box under
C
ONFIGURATION
T
RANSFER
. If the filename is known, it can be entered directly into the
file box. If the filename is not known, the user may select the
B
ROWSE
button. After clicking B
ROWSE
, a
Windows file browser will display. Select the appropriate file and click
O
PEN
. Once the correct filename
appears in the file box, click the
U
PLOAD
button. The following message will display:
Upload done. The unit is rebooting with the new configuration...
After waiting for the unit to complete the reboot cycle, the user should close out the active browser session,
initiate a new session, and login to the unit as before. Refer to DLP-010, Loading a Saved Configuration
into the NetVanta for more details.
> LOGOUT
To logout of the NetVanta 2000 series system, click on L
OGOUT
found on the right side of the menu bar.
Logging out requires confirmation by clicking the
L
OGOUT
button on the logout confirmation dialog. After
confirming the logout, the web session will immediately be terminated and the
L
OGGED
O
UT
S
UCCESSFULLY
page will be displayed.
When displaying the
U
PGRADE
F
IRMWARE
page, a Windows security warning page will be
displayed. Install and run the necessary file to continue the upgrade firmware process.
This file is signed with full permissions by ADTRAN, Inc.
If you want the
D
OWNLOAD
C
OMPLETE
dialog box to automatically close when the download
is complete, select that option inside the
W
INDOWS
D
OWNLOAD
C
OMPLETE
dialog box prior
to selecting
C
LOSE
.