Instruction manual

Section 3, Network Turnup Procedure NetVanta 2000 Series System Manual
28 © 2002 ADTRAN, Inc. 61200361L1-1E
1. INTRODUCTION
This section discusses the installation process of the NetVanta 2000 series systems.
2. TOOLS REQUIRED
The tools required for installation of the NetVanta 2000 series systems are:
• CATV-UTP Ethernet cable to connect the unit to the existing network
• An Internet browser for configuring the unit
3. UNPACK AND INSPECT THE SYSTEM
Each NetVanta 2000 series unit is shipped in its own cardboard shipping carton. Open each carton
carefully and avoid deep penetration into the carton with sharp objects.
After unpacking the unit, inspect it for possible shipping damage. If the equipment has been damaged in
transit, immediately file a claim with the carrier, then contact ADTRAN Customer Service (see Customer
Service, Product Support Information, and Training in the front of this manual).
Contents of ADTRAN Shipments - NetVanta 2050 and 2100
Your ADTRAN shipment includes the following items:
• The NetVanta 2050 or 2100 Unit
• The NetVanta 2000 series User Manual CD (ADTRAN P/N 3253041)
• AC Power supply - (ADTRAN P/N 336012 VUR01)
• Crossover Ethernet cable for connecting the NetVanta 2100 directly to a PC
(ADTRAN P/N 8125M012)
Contents of ADTRAN Shipments - NetVanta 2300 and 2400
Your ADTRAN shipment includes the following items:
• The NetVanta 2300 or 2400 Unit
• The NetVanta 2000 series User Manual CD (ADTRAN P/N 3253041)
• AC Power cable (ADTRAN P/N 3127009)
• (2) Brackets for installing the unit in a rackmount configuration (ADTRAN P/N 3265479)
To prevent electrical shock, do not install equipment in a wet location or during a
lightning storm.