Instruction manual

NetVanta 2000 Series System Manual Section 2, Engineering Guidelines
61200361L1-1E © 2002 ADTRAN, Inc. 21
WAN Connection
The NetVanta 2000 series provides a standard 10/100BaseT Ethernet interface for connection to the wide
area network. Connect the WAN interface to a hub connected to the router interfacing with the non-secure
Internet or the modem (cable or DSL) used for Internet access. A DHCP Client is enabled on the WAN
interface by default. References to the WAN interface include Internet, WAN, and Eth1.
DMZ Connection (NetVanta 2300 and 2400 Only)
The NetVanta 2300 and 2400 provide a standard 10/100BaseT Ethernet interface for providing public
server access. Table 5 shows the pinout for the DMZ port.
Connector Type (USOC) RJ-48C
Table 4. WAN Pinout
Pin Name Description
1 TX1 Transmit Positive
2 TX2 Transmit Negative
3 RX1 Receive Positive
4, 5 UNUSED —
6 RX2 Receive Negative
7, 8 UNUSED —
Connector Type (USOC) RJ-48C
Table 5. DMZ Pinout
Pin Name Description
1 TX1 Transmit Positive
2 TX2 Transmit Negative
3 RX1 Receive Positive
4, 5 UNUSED —
6 RX2 Receive Negative
7, 8 UNUSED —