Instruction manual

NetVanta 2000 Series System Manual Section 5, DLP-015

7. Enter the IP address for this record in the IP A

DDRESS

1 and 2 fields located at the bottom of the IP

Address Configuration dialog box. Enter a single IP address in the IP A

DDRESS

1 field. Enter a range

using both fields. Enter a subnet of IP addresses by putting the network IP address in the IP A

DDRESS

1 field and the subnet mask for that network in the IP A

DDRESS

2 field.

8. Click the Submit button to add the configured IP address to the IP Address component table. If the IP

address is successfully added the IP Address page will appear and the added address will be listed.