Instruction manual

61200361L1-1E © 2002 ADTRAN, Inc. 155
USING THE IP ADDRESS COMPONENT TABLE
Introduction
When configuring the NetVanta 2000 series, IP addresses are used repeatedly in many different
components of the setup. To make the configuration process easier, the NetVanta 2000 series is equipped
with an IP Address Component Table. The IP Address Component Table stores entered IP addresses for
use throughout the configuration. This DLP discusses adding an IP address to this table.
Prerequisite Procedures
This DLP assumes the NetVanta 2000 series is connected to a PC and a browser session is active. Refer to
DLP-001 for more details.
Tools and Materials Required
• No special tools or materials required.
To prevent electrical shock, do not install equipment in a wet location or during a
lightning storm.