Instruction manual

61200361L1-1E © 2002 ADTRAN, Inc. 143
DEFINING A USER GROUP IN THE NETVANTA
Introduction
The NetVanta 2000 series has the flexibility to allow policies to be implemented on a per-user basis. With
the User Group component tables you are able to create groups and assign users that share the same access
policies. The User Group feature allows each policy to be implemented dynamically as the user logs on
and off the system. This DLP discusses the procedure for creating a user group in the NetVanta 2000
series.
Prerequisite Procedures
This DLP assumes the NetVanta 2000 series is connected to a PC and a browser session is active. Refer to
DLP-001 for more details.
Tools and Materials Required
• No special tools or materials required.
To prevent electrical shock, do not install equipment in a wet location or during a
lightning storm.