Instruction manual

Section 5, DLP-011 NetVanta 2000 Series System Manual
134 © 2002 ADTRAN, Inc. 61200361L1-1E
9. If you are using Static IP Addressing on the WAN interface, enter the IP address of the next hop router
(provided by your ISP). Alternately, if you are using DHCP (Dynamic) or PPPoE addressing, enter the
IP address found in the DHCP Info window (see DLP-022 for details).
10. Enter the number of routers a packet would travel through to reach its destination in the Hop Count
field. This field is optional and will be left blank for this example.
11. Click the Add Route button to submit the route to the route table.
12. Follow the procedures in DLP-003 to save the settings to non-volatile memory.
Follow-up Procedures
Once this procedure is complete, return to the procedure which referred you to this DLP and continue with
the tasks indicated there.