Installation guide

Option Modules NetVanta 1000/1000R Series Hardware Installation Guide

NetVanta Serial DIM (P/N 1200886L1)

The NetVanta Serial DIM provides NetVanta products with the ability to interface with external devices

(e.g., Code Division Multiple Access (CDMA) devices and wireless modems), allowing for dial backup

access to the public switched telephone network (PSTN). This DIM is a plug-on module that connects to

the NIM. For installation instructions, see Installing Dial Backup and Network Interface Modules on

page 46.

Features and Specifications

Features

• 5-pin RS-232 interface vial host RJ-45 DBU connector

• Modem flow control support via CTS

• Communications with external model via AT commands

Compliance

• EMC - see on page 6.

• IEC 60950

• EN 60950

• UL/CL 60950

• AS/NZS 60950

Environmental

• Operating Temperature: 0°C to 50°C

• Storage Temperature: -20°C to 70°C

• Relative Humidity: Up to 95 percent, noncondensing

Physical

• Dimensions: 2.3-inch W x 2.75-inch D

An RJ-45 to DB-9 adapter cable (P/N 1200887L1) is required to connect to the external

modem.