Installation guide

Physical Description NetVanta 1000/1000R Series Hardware Installation Guide

Reviewing the Rear Panel Design

Figure 7 shows the NetVanta 1224 and 1224ST rear panel layout. Figure 8 shows the NetVanta 1224STR

(AC) and 1224R rear panel layout. Figure 9 shows the rear panel layout of the NetVanta 1224STR (DC).

Figure 10 shows the NetVanta 1524ST rear panel. All NetVanta rear panels contain a power connection

and a single DB-9 (female) interface (labeled

CONSOLE) used for connecting to a VT100 terminal or a PC

running VT100 terminal emulation software. The NetVanta 1524ST has a rear panel Ethernet port (labeled

ETH 0/0). The NetVanta 1224STR and NetVanta 1224R contain one modular network interface that

accepts a variety of modules (refer to Option Modules on page 25). Appendix A shows the pinouts for the

connectors.

Figure 7. NetVanta 1224 and NetVanta 1224ST Rear Panel Layout

Figure 8. NetVanta 1224STR (AC) and NetVanta 1224R Rear Panel Layout

Figure 9. NetVanta 1224STR (DC) Rear Panel Layout

Figure 10. NetVanta 1524ST Rear Panel Layout

Connection directly to an external modem requires a cross-over cable.

-48V....., 1.2A

+24V....., 2.5A

USE COPPER

CONDUCTORS ONLY