Installation guide

ManualsBrandsADTRAN ManualsConsumer electronicsNetVanta 1000 Series

NetVanta 1000 Series and

NetVanta 1000R Series

Hardware Installation Guide

1200500E1/L1 NetVanta 1224

1200504E1/L1 NetVanta 1224ST

1200510L1 NetVanta 1224STR (AC)

1200520E1/L1 NetVanta 1224R

1200530L1 NetVanta 1224R PWR

1200560E2/L2 NetVanta 1524ST

1200570L1 NetVanta 1224STR PWR

1200580L1 NetVanta 1224 PWR

1200584L1 NetVanta 1224ST PWR

1200590L1 NetVanta 1224STR (DC)

1200861L1 NetVanta 56K/64K Network Interface Module

1200862L2#NEBS NetVanta T1/FT1 NEBS Network Interface Module

1202862L1 NetVanta T1/FT1 Network Interface Module

1202863L1 NetVanta T1/FT1 + DSX-1 Network Interface Module

1200872L1 NetVanta Dual T1 Network Interface Module

1200868E1/L1 NetVanta E1/FE1 Network Interface Module

1200878E1/L1 NetVanta E1/FE1 + G.703 Drop Network Interface Module

1200866E1/L1 NetVanta Serial Network Interface Module

1200867L1 NetVanta SHDSL Network Interface Module

1200869E1/L1 NetVanta ADSL Network Interface Module, Annex A

1200889E1/L1 NetVanta ADSL Network Interface Module, Annex B

1200864L1 NetVanta Analog Modem Dial Backup Interface Module

1200865L1 NetVanta ISDN BRI Dial Backup Interface Module

1200875L1 NetVanta ISDN S/T Dial Backup Interface Module

1200886L1 NetVanta Serial Dial Backup Interface Module

1200480L1 1000BaseSX Multi-Mode SFP Module

1200481L1 1000BaseLX Single-Mode SFP Module

1202368L1 NetVanta VPN Accelerator Card

61200500L1-34J

July 2006

Summary of content (58 pages)

PAGE 1
NetVanta 1000 Series and NetVanta 1000R Series Hardware Installation Guide 1200500E1/L1 NetVanta 1224 1200504E1/L1 NetVanta 1224ST 1200510L1 NetVanta 1224STR (AC) 1200520E1/L1 NetVanta 1224R 1200530L1 NetVanta 1224R PWR 1200560E2/L2 NetVanta 1524ST 1200570L1 NetVanta 1224STR PWR 1200580L1 NetVanta 1224 PWR 1200584L1 NetVanta 1224ST PWR 1200590L1 NetVanta 1224STR (DC) 1200861L1 NetVanta 56K/64K Network Interface Module 1200862L2#NEBS NetVanta T1/FT1 NEBS Network Interface Module 12028
PAGE 2
Trademarks NetVanta 1000/1000R Series Hardware Installation Guide Trademarks Any brand names and product names included in this manual are trademarks, registered trademarks, or trade names of their respective holders. To the Holder of the Manual The contents of this manual are current as of the date of publication. ADTRAN reserves the right to change the contents without prior notice.
PAGE 3
NetVanta 1000/1000R Series Hardware Installation Guide Conventions Conventions Notes provide additional useful information. Cautions signify information that could prevent service interruption or damage to the equipment. Warnings provide information that could prevent injury or endangerment to human life. 61200500L1-34J Copyright © 2006 ADTRAN, Inc.
PAGE 4
Safety Instructions NetVanta 1000/1000R Series Hardware Installation Guide Safety Instructions When using your telephone equipment, please follow these basic safety precautions to reduce the risk of fire, electrical shock, or personal injury: 1. Do not use this product near water, such as a bathtub, wash bowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. 2. Avoid using a telephone (other than a cordless-type) during an electrical storm.
PAGE 5
NetVanta 1000/1000R Series Hardware Installation Guide FCC-Required Information FCC-Required Information FCC regulations require that the following information be provided in this manual: 1. This equipment complies with Part 68 of FCC rules and requirements adopted by ACTA. Each registered interface has a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, provide this information to the telephone company. 2.
PAGE 6
FCC Radio Frequency Interference Statement NetVanta 1000/1000R Series Hardware Installation Guide FCC Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
PAGE 7
NetVanta 1000/1000R Series Hardware Installation Guide Industry Canada Compliance Information Industry Canada Compliance Information Notice: The Industry Canada label applied to the product (identified by the Industry Canada logo or the “IC:” in front of the certification/registration number) signifies that the Industry Canada technical specifications were met. Notice: The Ringer Equivalence Number (REN) for this terminal equipment is supplied in the documentation or on the product labeling/markings.
PAGE 8
Warranty NetVanta 1000/1000R Series Hardware Installation Guide Warranty ADTRAN will repair and return this product within the warranty period if it does not meet its published specifications or fails while in service. Warranty information can be found in the Support section of the ADTRAN website at http://www.adtran.com. Product Registration Registering your product helps ensure complete customer satisfaction.
PAGE 9
NetVanta 1000/1000R Series Hardware Installation Guide Product Support Information Post-Sale Support Your reseller should serve as the first point of contact for support. If additional support is needed, the ADTRAN website provides a variety of support services such as a searchable knowledge base, updated firmware releases, latest product documentation, service request ticket generation and trouble-shooting tools.
PAGE 11
Table of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 NetVanta 1224 and NetVanta 1224ST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 NetVanta 1224STR (AC) and NetVanta 1224R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 NetVanta 1224STR (DC) . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 13
List of Figures Figure 1. Figure 2. Figure 3. Figure 4. Figure 5. Figure 6. Figure 7. Figure 8. Figure 9. Figure 10. Figure 11. Figure 12. Figure 13. Figure 14. Figure 15. Figure 16. Figure 17. Figure 18. Figure 19. Figure 20. Figure 21. Figure 22. Figure 23. Figure 24. Figure 25. Figure 26. NetVanta 1224 Front Panel Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NetVanta 1224ST Front Panel Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 15
List of Tables Table 1. Front Panel LED Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Table A-1. CONSOLE Port Pinouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Table A-2. SFP Slot Pinouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Table A-3. 10/100BaseT Ethernet Port Pinouts. . . . . . . . . . . . . .
PAGE 17
1. INTRODUCTION This hardware installation guide lists the NetVanta 1000 and 1000R Series units’ specifications, describes the physical characteristics of the units, introduces basic functionality, and provides installation instructions. All NetVanta 1000 and 1000R Series units run the ADTRAN Operating System (AOS) and are managed through an EIA-232 CONSOLE port (DB-9) located on the rear panel. Refer to Reviewing the Rear Panel Design on page 24 for more information.
PAGE 18
Introduction • • • • 1200864L1 1200865L1 1200875L1 1200886L1 NetVanta 1000/1000R Series Hardware Installation Guide Analog Modem DIM ISDN BRI DIM ISDN S/T DIM Serial DIM NetVanta 1224STR (DC) The NetVanta 1224STR (DC version) is a managed switch containing a multi-service router, housed in a 1U-high rack-mountable metal enclosure that includes a DC power supply.
PAGE 19
NetVanta 1000/1000R Series Hardware Installation Guide Introduction Unpacking and Inspecting the System Each NetVanta 1000 and 1000R Series unit is shipped in its own cardboard shipping carton. Open each carton carefully and avoid deep penetration into the carton with sharp objects. After unpacking the unit, inspect it for possible shipping damage.
PAGE 20
Product Specifications 1224ST 1224STR (AC) 1224STR (DC) 1224STR PWR 1224R 1524ST PRODUCT SPECIFICATIONS 1224 2.
PAGE 21
NetVanta 1000/1000R Series Hardware Installation Guide 3. Physical Description PHYSICAL DESCRIPTION Front Panel RJ-45 Ports and LEDs The NetVanta 1224, NetVanta 1224ST, NetVanta 1224STR, NetVanta 1224STR PWR, and NetVanta 1224R front panels contain twenty-four 10/100BaseT Ethernet ports (RJ-45). The NetVanta 1524ST front panel contains twenty-four 10/100/1000BaseT Ethernet ports.
PAGE 22
Physical Description NetVanta 1000/1000R Series Hardware Installation Guide Figure 4. NetVanta 1224STR PWR Front Panel Layout Figure 5. NetVanta 1224R Front Panel Layout Figure 6. NetVanta 1524ST Front Panel Layout SFP Module Slots The NetVanta 1224ST and 1224STR PWR support two SFP slots, the NetVanta 1224STR has one, and the NetVanta 1524ST has four. All accept a number of industry-standard SFP modules.
PAGE 23
NetVanta 1000/1000R Series Hardware Installation Guide Physical Description Table 1. Front Panel LED Descriptions LED STAT STK (1524ST only) Port LEDs (i.e., 1 through 24, G1, G2, etc.) DBU (1224R and 1224STR only) WAN (1224R and 1224STR only) Power over Ethernet Status LEDs (PWR units only) 61200500L1-34J Color Indication Green (flashing) On power-up the STAT LED flashes rapidly for five seconds, during which time the user may escape to boot mode from the CONSOLE port.
PAGE 24
Physical Description NetVanta 1000/1000R Series Hardware Installation Guide Reviewing the Rear Panel Design Figure 7 shows the NetVanta 1224 and 1224ST rear panel layout. Figure 8 shows the NetVanta 1224STR (AC) and 1224R rear panel layout. Figure 9 shows the rear panel layout of the NetVanta 1224STR (DC). Figure 10 shows the NetVanta 1524ST rear panel.
PAGE 25
NetVanta 1000/1000R Series Hardware Installation Guide 4. Option Modules OPTION MODULES The NetVanta 1224STR and NetVanta 1224R support several option modules designed to meet a variety of networking requirements. The option modules include plug-in network and voice interface modules (NIMs/VIMs) and plug-on dial backup interface modules (DIMs). NIMs/VIMs are cards which plug directly into the option module slot located on the rear of the base unit.
PAGE 26
Option Modules NetVanta 1000/1000R Series Hardware Installation Guide Network Interface Modules NetVanta 56K/64K NIM (P/N 1200861L1) The 56K/64K NIM (shown in Figure 11) provides a DDS WAN interface for the NetVanta. This module provides a single 56K or 64K DDS network interface. Refer to Table A-5 on page 53 for the WAN-DDS connector pinouts, and Table A-13 on page 56 for the DBU connector pinouts. An optional DIM is required for dial backup applications. Figure 11.
PAGE 27
NetVanta 1000/1000R Series Hardware Installation Guide Option Modules NetVanta T1/FT1 NIM (P/N 1202862L1) The T1/FT1 NIM (shown in Figure 12) provides a T1 WAN interface for the NetVanta. This module provides a full T1 or fractional T1 network interface. Refer to Table A-6 on page 53 for the WAN-T1 connector pinouts and Table A-13 on page 56 for the DBU connector pinouts. An optional DIM is required for dial backup applications. WAN-T1 DBU Figure 12.
PAGE 28
Option Modules NetVanta 1000/1000R Series Hardware Installation Guide NetVanta T1/FT1 NEBS NIM (P/N 1200862L2#NEBS) The T1/FT1 NEBS NIM (see Figure 13) T1 WAN interface for the NetVanta 1224STR DC. The T1 NEBS NIM is NEBS Level 3 compliant, and provides a full T1 or fractional T1 network interface. See Table A-6 on page 53 for the WAN-T1 connector pinouts. Although the T1/FT1 NEBS NIM is compliant with NEBS Level 3, the NetVanta 1224STR DC unit supports only NEBS Level 1. WAN-T1 Figure 13.
PAGE 29
NetVanta 1000/1000R Series Hardware Installation Guide Option Modules NetVanta T1/FT1 + DSX-1 NIM (P/N 1202863L1) The T1/FT1 + DSX-1 NIM (see Figure 14) provides a T1 WAN interface for the NetVanta, a full or fractional T1 network interface, and a DSX-1 interface. See the pinouts in Table A-6 on page 53 for the WAN-T1 connector, Table A-8 on page 54 for the DSX-1 connector, and Table A-13 on page 56 for the DBU connector pinouts. An optional DIM is required for dial backup applications.
PAGE 30
Option Modules NetVanta 1000/1000R Series Hardware Installation Guide NetVanta Dual T1 NIM (P/N 1200872L1) The NetVanta Dual T1 NIM (see Figure 15) provides two WAN T1 interfaces for the NetVanta. Refer to Table A-6 on page 53 for the pinouts. Refer to Table A-13 on page 56 for the DBU connector pinouts. An optional DIM is required for dial backup applications. Figure 15.
PAGE 31
NetVanta 1000/1000R Series Hardware Installation Guide Option Modules NetVanta E1/FE1 NIM (P/N 1200868E1/L1) The NetVanta E1/FE1 module (see Figure 16) provides a WAN-E1 interface for the NetVanta meeting the requirements of ITU-T G.703/G.704. The module provides a single 2.048 Mbps network interface. Refer to Table A-7 on page 53 for the pinouts. Refer to Table A-13 on page 56 for the DBU connector pinouts. An optional DIM is required for dial backup applications. WAN-E1 DBU Figure 16.
PAGE 32
Option Modules NetVanta 1000/1000R Series Hardware Installation Guide NetVanta E1/FE1 + G.703 Drop NIM (P/N 1200878E1/L1) The NetVanta E1/FE1 + G.703 Drop NIM (see Figure 17) provides a single WAN-E1 interface (2.043 Mbps) with user-selectable TS0 assignment and a G.703 drop port which may be used to drop and insert traffic to an E1 PBX. See Table A-7 on page 53 for the WAN-E1 pinouts. See Table A-9 on page 54 for the G.703 pinouts. See Table A-13 on page 56 for the DBU connector pinouts.
PAGE 33
NetVanta 1000/1000R Series Hardware Installation Guide Option Modules NetVanta Serial NIM (P/N 1200866E1/L1) The NetVanta Serial NIM (shown in Figure 18) can be configured by the user as a V.35, X.21 (V.11), or EIA 530 interface. This module supports rates up to a maximum of 10 Mbps. An additional V.35 (ADTRAN P/N 1200873L1), X.21 (ADTRAN P/N 1200874L1), or EIA 530 (ADTRAN P/N 1200883L1) cable is required (refer to Caution, below).
PAGE 34
Option Modules NetVanta 1000/1000R Series Hardware Installation Guide NetVanta SHDSL NIM (P/N 1200867L1) The NetVanta SHDSL NIM (shown in Figure 19) provides a WAN SHDSL interface for the NetVanta. See Table A-10 on page 54 for the SHDSL connector pinouts. See Table A-13 on page 56 for the DBU connector pinouts. An optional DIM is required for dial backup applications. DBU WAN-SHDSL Figure 19.
PAGE 35
NetVanta 1000/1000R Series Hardware Installation Guide Option Modules NetVanta ADSL NIM, Annex A (P/N 1200869E1/L1) The NetVanta ADSL NIM, Annex A (see Figure 20) adds ADSL capability to the NetVanta. The module provides a single ADSL, ADSL2, or ADSL2+ network interface to support rates up to 25 Mbps. See Table A-11 on page 54 for the pinouts. The ADSL NIM supports an optional DIM for dial backup applications. See Table A-13 on page 56 for the DBU connector pinouts. DBU WAN-ADSL Figure 20.
PAGE 36
Option Modules NetVanta 1000/1000R Series Hardware Installation Guide NetVanta ADSL NIM, Annex B (P/N 1200889E1/L1) The NetVanta ADSL NIM, Annex B (see Figure 21) adds ADSL capability to the NetVanta. See Table A-11 on page 54 for the pinouts. The ADSL NIM supports an optional DIM for dial backup applications. See Table A-13 on page 56 for the DBU connector pinouts. DBU WAN-ADSL Figure 21.
PAGE 37
NetVanta 1000/1000R Series Hardware Installation Guide Option Modules Dial Backup Interface Modules NetVanta Analog Modem DIM (P/N 1200864L1) The Analog Modem DIM provides a modem with data rates up to 33.6 kbps for the NetVanta. This DIM is a plug-on card that connects to the NIM. For installation instructions, refer to Installing Dial Backup and Network Interface Modules on page 46. Features and Specifications Features • • Supported Standards: ITU V.90 Async Compliance • • • • EMC - see on page 6.
PAGE 38
Option Modules NetVanta 1000/1000R Series Hardware Installation Guide NetVanta ISDN BRI DIM (P/N 1200865L1) The NetVanta ISDN BRI DIM provides dial backup access to the public switched telephone network (PSTN) via Basic Rate ISDN for the NetVanta. This DIM is a plug-on module that connects to the NIM. For installation instructions, refer to Installing Dial Backup and Network Interface Modules on page 46.
PAGE 39
NetVanta 1000/1000R Series Hardware Installation Guide Option Modules NetVanta ISDN S/T DIM (P/N 1200875L1) The NetVanta ISDN S/T DIM provides dial backup access to the public switched telephone network (PSTN) via Basic Rate ISDN for the NetVanta. This DIM is a plug-on module that connects to the NIM. For installation instructions, see Installing Dial Backup and Network Interface Modules on page 46.
PAGE 40
Option Modules NetVanta 1000/1000R Series Hardware Installation Guide NetVanta Serial DIM (P/N 1200886L1) The NetVanta Serial DIM provides NetVanta products with the ability to interface with external devices (e.g., Code Division Multiple Access (CDMA) devices and wireless modems), allowing for dial backup access to the public switched telephone network (PSTN). This DIM is a plug-on module that connects to the NIM.
PAGE 41
NetVanta 1000/1000R Series Hardware Installation Guide 5. Unit Installation UNIT INSTALLATION The instructions and guidelines provided in this section cover hardware installation topics such as mounting options, supplying power to the unit, and installing option cards.
PAGE 42
Unit Installation NetVanta 1000/1000R Series Hardware Installation Guide Mounting Options The unit may be installed in rackmount, wallmount, or tabletop configurations. The following sections provide step-by-step instructions for rack mounting and wall mounting. If you have purchased the VPN Accelerator Card, install it first (refer to Installing the NetVanta VPN Accelerator Card (P/N 1202368L1) on page 48).
PAGE 43
NetVanta 1000/1000R Series Hardware Installation Guide Unit Installation Wall Mounting the NetVanta By following these instructions exactly, the NetVanta can be safely mounted to the wall. Instructions for Wall Mounting the NetVanta Step Action 1 Remove the mounting ears. Rotate them 90 degrees so that the portion of the bracket with the mounting holes is flush with the bottom of the chassis. Reattach the mounting ears to the chassis (see Figure 22 on page 44).
PAGE 44
Unit Installation NetVanta 1000/1000R Series Hardware Installation Guide Figure 22. Wallmount Installation Supplying Power to the Unit NetVanta 1000 and 1000R Series AC-Powered Units The AC-powered NetVanta 1000 and 1000R Series units come equipped with an auto-sensing 100 to 250 VAC, 50/60 Hz power supply for connecting to a properly grounded power receptacle. (A detachable power cable with a grounded, three-prong plug comes with the shipment.
PAGE 45
NetVanta 1000/1000R Series Hardware Installation Guide Unit Installation NetVanta 1224STR (DC) The DC-powered NetVanta 1224STR connects to a centralized DC power source via the four-position power connector on the rear of the chassis (see Figure 9 on page 24). Power and ground connections require copper conductors and a ring lug.
PAGE 46
Unit Installation NetVanta 1000/1000R Series Hardware Installation Guide Installing Dial Backup and Network Interface Modules The DIM plugs on to the NIM. The NIM is then installed into the rear panel option module slot. The following tables list the installation steps. Also see Figure 24 on page 46 and Figure 25 on page 47. For NetVanta modules with outside plant connections, ensure that all cables are removed from the module before installing or removing it from the NetVanta chassis.
PAGE 47
NetVanta 1000/1000R Series Hardware Installation Guide Unit Installation Instructions for Installing the NIMs Step Action 1 Remove power from the unit. 2 Slide the option module into the option slot until the module is firmly seated against the chassis. 3 Secure the pins at both edges of the module. 4 Connect the cables to the associated device(s). 5 Restore power to the unit. Figure 25. NIM and DIM Installation 61200500L1-34J Copyright © 2006 ADTRAN, Inc.
PAGE 48
Unit Installation NetVanta 1000/1000R Series Hardware Installation Guide Installing the NetVanta VPN Accelerator Card (P/N 1202368L1) The optional VPN Accelerator card plugs into a 32-bit PCI slot and is designed to be used in the NetVanta 1224STR to provide encryption/decryption and security acceleration services. The card provides the following security services to the host processor: DES, triple-DES (3DES), AES, SHA-1, MD5, and random number generation.
PAGE 49
NetVanta 1000/1000R Series Hardware Installation Guide Unit Installation Your NetVanta is now ready to be configured and connected to the network. For more information on configuration for a specific application, refer to the quick configuration documents provided on your ADTRAN OS System Documentation CD. For details on the command line interface, refer to the Command Reference Guide (also included on your CD). 61200500L1-34J Copyright © 2006 ADTRAN, Inc.
PAGE 51
APPENDIX A. CONNECTOR PIN DEFINITIONS The following tables provide the pin assignments for the base unit, network interface modules (NIMs), and dial backup interface modules (DIMs). Base Unit Pinouts Table A-1.
PAGE 52
Appendix A. Connector Pin Definitions NetVanta 1000/1000R Series Hardware Installation Guide Table A-3. 10/100BaseT Ethernet Port Pinouts Pin Name Description 1 TX1 Transmit Positive 2 TX2 Transmit Negative 3 RX1 Receive Positive 4, 5 — 6 RX2 7, 8 — Unused Receive Negative Unused Table A-4.
PAGE 53
NetVanta 1000/1000R Series Hardware Installation Guide Appendix A. Connector Pin Definitions Network Interface Module Pinouts Table A-5. WAN-DDS Connector Pinouts Pin Name Description 1 R1 Transmit data to the network–Ring 1 2 T1 Transmit data to the network–Tip 1 3-6 — Unused 7 T Receive data from the network–Tip 8 R Receive data from the network–Ring Table A-6.
PAGE 54
Appendix A. Connector Pin Definitions NetVanta 1000/1000R Series Hardware Installation Guide Table A-8. DSX-1 Connector Pinouts Pin Name Description 1 R Transmit data toward the DTE–Ring 2 T Transmit data toward the DTE–Tip 3 — Unused 4 R1 Receive data from the DTE–Ring 1 5 T1 Receive data from the DTE–Tip 1 6-8 — Unused Table A-9. G.
PAGE 55
NetVanta 1000/1000R Series Hardware Installation Guide Appendix A. Connector Pin Definitions Table A-12. Serial to Cable Connector Pinouts Serial Pin V.35 Pin X.21 Pin EIA 530 Pin Name 1 P 2 2 TD_A 2 U N/A 24 ETC_A 3 Y N/A 15 TCLK_A 4 V 6 17 RCLK_A 5 R 4 3 RD_A 6 F N/A 8 DCD_A 7 H N/A 20 DTR_A 8 C 3 4 RTS_A 9 N/A 10 19 RTS_B (V.11 only) 10 N/A 12 13 CTS_B (V.
PAGE 56
Appendix A. Connector Pin Definitions NetVanta 1000/1000R Series Hardware Installation Guide Dial Backup Interface Module Pinouts (DBU Connector) An optional DIM is required for dial backup applications. Table A-13. Analog Modem and ISDN BRI DBU Connector Pinouts Pin Name Description 1-3 — Unused 4 R Network–Ring 5 T Network–Tip 6-8 — Unused Table A-14.
PAGE 57
Index Numerics 1000BaseLX single-mode SFP module 22 1000BaseSX multi-mode SFP module 22 56K/64K NIM 26 A ADSL NIM, Annex A 35 ADSL NIM, Annex B 36 ADTRAN operating system 17 C command line interface 41 connecting to an external modem 24 console port description 17, 24 customer service 8, 19 D DBU LED 23 Dial Backup Interface Modules Analog Modem card 37 ISDN BRI card 38 ISDN S/T card 39 Serial card 40 DIMs, installing 46 dual T1 NIM 30 E E1/FE1 31 E1/FE1 + G.
PAGE 58
Index serial NIM 33 SFP module descriptions 22 SFP slots 18, 22 SHDSL interface 34 SHDSL NIM 34 shipment contents of 19 damage during transit 19 inspection of 19 specifications 20 STAT LED 23 STK LED 23 58 NetVanta 1000/1000R Series Hardware Installation Guide T T1, dual module 30 T1/FT1 + DSX-1 module 29 T1/FT1 module 27 T1/FT1 NEBS module 28 tools required for installation 41 V VPN accelerator card 48 W wall mounting instructions 43 WAN LED 23 warranty 8 Copyright © 2006 ADTRAN, Inc.