Specifications

Menu Descriptions
61189500L1-1F 5-39
The PPP BCP/IPCP menu options are listed in Table 5-16.
Table 5-16. PPP BCP/IPCP Menu Options
Option Description Function
1 BCP/IPCP This option is used to select either BCP (Bridge Control
Protocol) or IPCP (IP Control Protocol for routing). This option
also changes the Routing Mode between disabled and enabled
respectively.
PPP (1-4)
2 IP Address This option invokes another menu which is used to enter the IP
Address, the Subnet Mask for the PPP. The IP Address is
written in the format XXX.XXX.XXX.XXX, where each 3-digit
field has a value between 1 and 255.
N/A Subnet Mask This field displays the PPP Subnet Mask. The Subnet Mask is
written in the format XXX.XXX.XXX.XXX, where each 3-digit
field has a value between 1 and 255.
N/A Far End IP Address This read-only field displays the far-end device IP address.
3 SNMP Link Status Trap This option invokes another menu which is used to either
enable or disable the SNMP link status trap.
4 PPP MTU This option is used to set the MTU size to 1500 or 1520.
N/A LCP Status This read-only field displays the Link Control Protocol (LCP)
status as Up or Down.
N/A BCP/IPCP Status This read-only field displays the BCP/IPCP status as Up or
Down.