Specifications

Menu Descriptions
61189500L1-1F 5-37
N/A MAC Address This read-only field displays the Medium Access Control (MAC)
Address. MAC Addresses are location-independent
(programmed into the card at manufacture, they relocate when
the card does). MAC Addresses are contained in the headers of
packets and are used to filter and forward packets.
Eth (1-4)
3 Link Speed & Duplex This option invokes another menu which is used to select the
data rate setting for Ethernet Port (1-4) on the front panel of the
MX410/MX412. Options are as follows:
• Auto: This option sets the MX410/MX412 to automatically
detect the speed of the attached device.
• 10 Mbps, Half Duplex: This option sets the Ethernet
interface to transmit or receive at 10 mb/s.
• 10 Mbps, Full Duplex: This option sets the Ethernet
interface to transmit and receive simultaneously at
10 mb/s.
• 100 Mbps, Half Duplex: This option sets the Ethernet
interface to transmit or receive at 100 mb/s.
• 100 Mbps, Full Duplex: This option sets the Ethernet
interface to transmit and receive simultaneously at
100 mb/s.
N/A Functional Link Speed &
Duplex
This read-only field displays the actual data rate of the port.
N/A Link Status This read-only field displays the status of the network as being
either Up or Down.
Table 5-15. Ethernet Menu Options (Continued)
Option Description Function