Specifications

MX410 Data Path Block Diagram
61189500L1-1F 3-15
Figure 3-17 shows the Quick Setup menu after DS0s 23-24 have been dropped from DS1 1 to
PPP1, and PPP 2, 3, and 4 have been inserted into DS0s 23-24 in DS1 2, 3, and 4,
respectively. PPP 2, 3, and 4 are typically not used in this fashion for the integrated wireless
access device application.
Figure 3-17. Integrated Wireless Access Device Quick Setup - Example
Figure 3-18 shows the Cross-Connect Mapping menu for DS1 1 after mapping the PPPs but
prior to mapping the remaining DS0s to be mapped.
Figure 3-18. Integrated Wireless Access Device Cross-Connect Map - Example 1
MX410 MM/DD/YY HH:MM
Active Alarms: CRITICAL MINOR ID: MX410
Quick Setup
Ports
1 - PPPs
PPP 1 = DS1 1 DS0 #23-24
PPP 2 = DS1 2 DS0 #23-24
PPP 3 = DS1 3 DS0 #23-24
PPP 4 = DS1 4 DS0 #23-24
2 - V.35 =
System
3 - System ID
4 - IP Address : 192.168.100.1
Subnet Mask : 255.255.0.0
5 - Default Gateway : 192.168.1.1
6 - Date
7 - Time 8 - Cross-Connect Mapping
Selection : '?' - System Help Screen
MX410 MM/DD/YY HH:MM
Active Alarms: CRITICAL MINOR ID: MX410
Cross-Connect Mapping
DS1 1
1 - DS0 #1 = DS1 2 DS0 #1 13 - DS0 #13 = DS1 2 DS0 #13
2 - DS0 #2 = DS1 2 DS0 #2 14 - DS0 #14 = DS1 2 DS0 #14
3 - DS0 #3 = DS1 2 DS0 #3 15 - DS0 #15 = DS1 2 DS0 #15
4 - DS0 #4 = DS1 2 DS0 #4 16 - DS0 #16 = DS1 2 DS0 #16
5 - DS0 #5 = DS1 2 DS0 #5 17 - DS0 #17 = DS1 2 DS0 #17
6 - DS0 #6 = DS1 2 DS0 #6 18 - DS0 #18 = DS1 2 DS0 #18
7 - DS0 #7 = DS1 2 DS0 #7 19 - DS0 #19 = DS1 2 DS0 #19
8 - DS0 #8 = DS1 2 DS0 #8 20 - DS0 #20 = DS1 2 DS0 #20
9 - DS0 #9 = DS1 2 DS0 #9 21 - DS0 #21 = DS1 2 DS0 #21
10 - DS0 #10 = DS1 2 DS0 #10 22 - DS0 #22 = DS1 2 DS0 #22
11 - DS0 #11 = DS1 2 DS0 #11 23 - DS0 #23 = PPP 1
12 - DS0 #12 = DS1 2 DS0 #12 24 - DS0 #24 = PPP 1
(T)oggle View (DS1 2, DS1 3, DS1 4, Ports) 25 - Map Multiple DS0's
Selection : '?' - System Help Screen