Specifications

MX410/MX412 System Manual
5-56 61189500L1-1F
PPP Interfaces
1-4 State This field displays the current state of the four PPP interfaces as either
Enabled or Disabled.
N/A LCP This field displays the active state of this control protocol as either Up
or Down.
N/A BCP This field Displays the active state of this control protocol as either Up
or Down.
N/A IPCP This field Displays the active state of this control protocol as either Up
or Down.
Ethernet Ports
1-4 Status This field displays the current status as either Up or Down.
N/A Speed This field Displays one of the following speeds as active:
• 10 Mbps, Half Duplex
• 10 Mbps, Full Duplex
• 100 Mbps, Half Duplex
• 100 Mbps, Full Duplex
Auxiliary Alarms
1-4 Status This field displays the current alarm status as either Active or Cleared.
N/A Severity This field displays the current alarm severity. Severities are defined by
the customer and displayed as Critical, Major, Minor, Alert, or Info.
Power Feed
A/B Status This field displays the power feed (which connects to the rear of the
MX410/MX412) as either Normal or Failed.
PSU (MX410 Only)
A/B State This field displays the current status of the A/B PSUs as either
Installed or Removed.
N/A Status This field displays the current status of the A/B PSUs as Normal,
Failed (if the PSU is installed), or N/A (if the PSU is not installed).
Timing Source
Primary/
Secondary
Status This field displays the status as either Active, Standby, or Failed.
N/A Source This field Displays internal or DS1 (1-4 on MX410 or 1-12 on MX412).
Table 5-30. Status Screen Fields (Continued)
Option Description Function