Specifications

MX410/MX412 System Manual
5-54 61189500L1-1F
Status Screens
The Status screens (see Figure 5-40, Figure 5-41, and Figure 5-42) provides detailed status
information about the DS1 Ports, Ethernet Ports, PPP, Timing, Power Feed, and Frame Relay.
Use the
T to toggle through the screens. The MX410 has two status screens and the MX412
has three.
Figure 5-40. DS1, PPP, and FXS Status Screen
Figure 5-41. Ethernet, Alarms, Timing, and Power Status Screen
MX412 MM/DD/YY HH:MM
Active Alarms: CRITICAL MAJOR ID: MX412
Status
DS1 Ports PPP Interfaces
State Line Status RxdB Test State LCP BCP IPCP
1 - Enabled LOS,TX RAI -15 Data mode 1 - Disabled DOWN DOWN DOWN
2 - Enabled LOS,TX RAI -15 Data mode 2 - Disabled DOWN DOWN DOWN
3 - Enabled LOS,TX RAI -15 Data mode 3 - Disabled DOWN DOWN DOWN
4 - Enabled LOS,TX RAI -15 Data mode 4 - Disabled DOWN DOWN DOWN
5 - Enabled LOS,TX RAI -15 Data mode
6 - Enabled LOS,TX RAI -15 Data mode
7 - Enabled LOS,TX RAI -15 Data mode
8 - Enabled LOS,TX RAI -15 Data mode FXS
9 - Enabled LOS,TX RAI -15 Data mode Mode Status
10 - Enabled LOS,TX RAI -15 Data mode D4 Loop Start N/A
11 - Enabled LOS,TX RAI -15 Data mode
12 - Enabled LOS,TX RAI -15 Data mode
<T>oggle Screen
MX412 MM/DD/YY HH:MM
Active Alarms: CRITICAL MAJOR ID: MX412
Status
Ethernet Ports Auxiliary Alarms
Status Speed Status Severity
1 - Up 100 Mbps, Full Duplex 1 - Cleared N/A
2 - Down Unknown 2 - Cleared N/A
3 - Down Unknown 3 - Cleared N/A
4 - Down Unknown 4 - Cleared N/A
Timing Source Power Feed
Status Source Status
Primary - Failed DS1 1 A - Failed
Secondary - Failed DS1 3 B - Normal
<T>oggle Screen