Specifications

Menu Descriptions
61189500L1-1F 5-53
3 FXS (MX412 only) This option is used to provision the FXS port. Options are as
follows:
• Choose TO Group (for DS1 1 through DS1 4)
• Choose TO DS0 Range: enter a range
• Mode: Select Loop Start, PLAR D4, PLAR D3, or FX
Ringdown. Refer to Table 4-6 on page 4-9 for descriptions of
these options.
• Apply Cross-Connect
3 System ID This option is used to assign a new system ID.
4 IP Address This option is used to enter the IP Address for the MX410/
MX412. The IP Address is written in the format
XXX.XXX.XXX.XXX, where each 3-digit field has a value
between 1 and 255.
N/A Subnet Mask This option is used to enter the subnet mask, written in the
format XXX.XXX.XXX.XXX, where each 3-digit field has a value
between 1 and 255.
5 Default Gateway This option is used to enter the default gateway. The Gateway
address is written in the format XXX.XXX.XXX.XXX, where
each 3-digit field has a value between 1 and 255.
6 Date This option is used to enter the date.
7 Time This option is used to enter the time.
8 Cross-Connect Mapping This is another path to the Cross-Connect Mapping menu,
shown in
Figure 5-20 on page 5-27, and contains the same
options.
9 Frame Relay This option is used to provision the frame relay cross-connect.
Options are as follows:
• Choose FROM Port (for FR1–FR4)
• Choose TO Group (for DS1 1–DS1 4)
• Choose TO DS0 Range (enter range of DS0s)
• Apply Cross-Connect
Table 5-29. Quick Setup Menu Options (Continued)
Option Description Function