Specifications

MX3216 System Manual
6-32 61189008L1-1B
DS1 Port 1–16 Menu
The DS1 Port 1–16 menu (see Figure 6-19) is used to provision the line length, line coding,
loopback detection, and circuit identifier for the DS1 ports.
Figure 6-19. DS1 Port 1–16 Menu
The DS1 Port 1–16 menu options are shown in Table 6-11.
Table 6-11. DS1 Port 1–16 Menu Options
Option Description Function
1 Line Length (feet) This option is used to set the line length (line build
out) for each port interface according to the distance
from the MX3216 system to the DTE device.
Options are as follows:
• 0–133
• 133–266
• 266–399
• 399–533
• 533–655
2 Line Coding This option is used to select the line coding state.
Options are as follows:
•AMI
•B8ZS
Card: Controller A ADTRAN MX3216 System MM/DD/YY hh:mm
Unacknowledged Alarms: NONE ID: Site 1 MX3216
MX3216->Provisioning->DS1 Ports->Port #1
1 - Line Length (feet) : 0-133
2 - Line Coding : B8ZS
3 - Loopback Detection : Disabled
4 - Circuit Identifier : DS1 Port #1
Selection : '?' - System Help Screen