Specifications

MX3216 System Manual
6-28 61189008L1-1B
Equipment Identification Menu
The Equipment Identification menu (see Figure 6-16) is used to enter ID codes for the near
and far end facility, location, frame, unit, and equipment. These fields provide user-config-
urable text strings to identify the MX3216 system over the network.
Figure 6-16. Equipment Identification Menu
The Equipment Identification menu options are shown in Table 6-8.
Table 6-8. Equipment Identification Menu Options
Option Description Function
1 Near End Facility ID Code This option is used to enter a near end facility ID
code. When using C-bit framing, this is transmitted
in the DS3 overhead to the next device. The code is
a user-configurable text string. This field accepts up
to 38 alphanumeric characters, including spaces
and special characters.
2 Near End Location ID Code This option is used to enter a near end location ID
code. When using C-bit framing, this is transmitted
in the DS3 overhead to the next device. The code is
a user-configurable text string. This field accepts up
to 11 alphanumeric characters, including spaces
and special characters.
Card: Controller A ADTRAN MX3216 System MM/DD/YY hh:mm
Unacknowledged Alarms: NONE ID: Site 1 MX3216
MX3216->Provisioning->DS3->A Equipment Identification
1 - Near End Facility ID Code : N/A
2 - Near End Location ID Code : N/A
3 - Near End Frame ID Code : N/A
4 - Near End Unit Code : N/A
5 - Near End Equipment Code : N/A
Far End Facility ID Code : N/A
Far End Location ID Code : N/A
Far End Frame ID Code : N/A
Far End Unit Code : N/A
Far End Equipment Code : N/A
6 - Copy Near End data from DS3 B Near End Data
Selection : '?' - System Help Screen