Specifications

MX3216 System Manual
6-26 61189008L1-1B
DS3 Provisioning Menu
The DS3 Provisioning menu (see Figure 6-15) provides options to provision the Tx framing, Tx
clock source, loopback detection, and DS3 circuit identifier for DS3 A and B.
Figure 6-15. DS3 Provisioning Menu
The DS3 Provisioning menu options are shown in Table 6-7.
Table 6-7. DS3 Provisioning Menu Options
Option Description Function
1 Tx Framing This option is used to provision the framing.
Options are as follows:
•C-Bit
• M23 (also called “M13”)
2 Tx Clock Source This option is used to provision the timing. Options
are as follows:
• Loop: When this option is selected, timing is
received from the DS3 network.
• Local: When this option is selected, timing is
44.736 Mbps ± 20 ppm (ANSI T1.102-1993).
Card: Controller A ADTRAN MX3216 System MM/DD/YY hh:mm
Unacknowledged Alarms: NONE ID: Site 1 MX3216
MX3216->Provisioning->DS3->A
1 - Tx Framing : C-Bit
2 - Tx Clock Source : Local
3 - Loopback Detection : Enabled
4 - DS3 Circuit Identifier : DS3 A
Selection : '?' - System Help Screen