Specifications

MX3216 System Manual
5-2 61189008L1-1B
Cross-Connect Mapping
Cross-Connect Mapping Connections can be made between the
following:
• DS3 B T1 #1 to #28
• DS1 Ports #1 to #16
• Module A #1 to #4
• Module B #1 to #4
DS3 A T1 #1 - #28 = DS3 B
T1 #1 - #28, respectively
General
Craft Port Baud Rate Auto; Disabled; 9600; 19200; 38400;
57600; 115200
115200
Date MM/DD/YYYY N/A
Time HH:MM:SS (24 hour format) N/A
Auto-Logoff Inactivity Time Disabled; 1-Min; 5-Min; 10-Min; 15-Min;
30-Min; 45-Min; 60-Min
15-Min
Scheduled Card Reset MM/DD/YYYY HH:MM:SS Disabled
Network Management
IP Address 0–255.0–255.0–255.0–255 Not configured
Subnet Mask 0–255.0–255.0–255.0–255 Not configured
Gateway 0–255.0–255.0–255.0–255 Not configured
Provisioned Data Rate 10 Mbps; 100 Mbps; Auto Auto
Cross-Over Mode MDI; MDI-X; Auto Auto
Secondary Telnet Port User defined 2002
TFTP Server 0–255.0–255.0–255.0–255 Not configured
SNMP
SNMP State Disabled; Enabled Disabled
SNMP Traps Disabled; Enabled Disabled
Trap Host 1 - 4 Status Valid; Under Creation; Invalid Invalid
System ID User defined System ID Not Set
System Location User defined System Location Not Set
System Contact User defined System Contact Not Set
Read Community User defined public
Write Community User defined private
Table 5-1. MX3216 Default Provisioning Options (Continued)
Provisioning Option Available Options Default Setting