Specifications
61189008L1-1B 4-1
Section 4
Installation
INTRODUCTION
CAUTION
Electronic units can be damaged by ESD. When handling units,
wear an antistatic discharge wrist strap to prevent damage to
electronic components. Place units in antistatic packing material
when transporting or storing. When working on units, always place
them on an approved antistatic mat that is electrically grounded.
After unpacking the MX3216 system, inspect it for damage. If damage has occurred, file a
claim with the carrier and then contact ADTRAN Customer Service. Refer to “Appendix A,
Warranty” for further information. If possible, keep the original shipping container to return
the MX3216 system for repair or for verification of shipping damage.
Required Components
• MX3 Chassis (P/N 1189001L1)
• MX3216 Controller Card (P/N 1189008L1)
• MX3 Fan Module (P/N 1189007L1)
• Mounting brackets and screws for 19-inch or 23-inch rack installation or for wall
installation
• Ground lug with nut and lock washer
• Wire-wrap post cover
• Power cover
C A U T I O N !
SUBJECT TO ELECTROSTATIC DAMAGE
OR DECREASE IN RELIABILITY.
HANDLING PRECAUTIONS REQUIRED.