Specifications

Section 3, Application Guidelines - MX3RMM Data Path Block Diagram
61189008L1-1B 3-15
Remote Management of Other Systems Using Terminal Server
Ports Application
This application is an extension of the “MX3216 with Remote Management Application” on
page 3-11. In the remote management of other systems using terminal server ports applica-
tion, the terminal server ports on the MX3RMM provide remote management of other equip-
ment at the same site. This requires connecting the RS-232 craft ports of the other equipment
to the terminal server ports of the MX3RMM. Then, establishing a Telnet session to the
MX3RMM terminal server ports gives access to the other equipment (see Figure 3-16). Up to
four external devices can be accessed in this way.
Figure 3-16. Remote Management of Other Systems Using Terminal Server Ports
Application Diagram
Table 3-4 shows the equipment needed for a MX3216 with remote management of other
systems using terminal server ports application.
Table 3-4. Remote Management of Other Systems Using Terminal Server Ports -
Required Equipment
Part # Equipment Quantity
1189001L1 MX3 Chassis 1
1189004L1 MX3 Remote Management
Module (MX3RMM)
1
1189007L1 MX3 Fan Module 1
1189008L1 MX3216 Controller Card 1 (2 for redundancy)
ENET
MX3216
Drop DS1s
ENET
RMM
ENET
MX3216
DS3
Drop DS1s
28 DS1s
from
Central Site
Central Site Remote Site #1 Remote Site #2
DS3
µ Wave/
Leased
DS3
DS3DS3
DS3
µ Wave/
Leased
DS3
ENET
DS3
Technician
Manages all
MX3216 units
and other systems
from any Cell Site
Other Systems
being managed
through RMM
Terminal Server
Ports connected
to their RS-232
craft ports
RMM