Specifications

MX3216 System Manual
6-118 61189008L1-1B
Loopback This field displays the state of any loopback tests. Table 6-83 on
page 6-119 describes the possible loopback test states.
TDM This field displays the status of the HDLC link on the DS1. Possible
states are as follows:
•Up
• Down: This state can indicate a problem with the DS1 or with the
DS0 assignment.
• In Loopback
PPP This field displays the state of the PPP link. The PPP link status
depends on the TDM status being up. Possible states are as follows:
•Up
•Down
•Test
Bridging This field displays the state of the BCP link across the PPP. The
bridging status depends on the PPP status being up. Possible states are
as follows:
•Up
•Down
•Test
Ethernet
Link Speed This field displays the current link speed. Possible speeds are as
follows:
• 10 Mbps, Half Duplex
• 10 Mbps, Full Duplex
• 100 Mbps, Half Duplex
• 100 Mbps, Full Duplex
Link Status This field displays the state of the link. Possible states are as follows:
•Up
•Down
Rx Octets This field displays the number of bytes received on the Ethernet
interface.
Tx Octets This field displays the number of bytes transmitted on the Ethernet
interface.
Table 6-81. Status Screen Fields (Continued)
Field Description