Specifications

Section 6, User Interface - Menu Descriptions
61189008L1-1B 6-115
Quick Setup Menu
The Quick Setup menu (see Figure 6-72) provides all of the basic configuration options
necessary to get the MX3RMM running.
Figure 6-72. Quick Setup Menu
The Quick Setup menu options are shown in Table 6-80.
Table 6-80. Quick Setup Menu Options
Option Description Function
1 Timeslot Assignment This option is used to enter the DS0 timeslots for
the network interfaces. Both network interfaces use
the same number of DS0s. Any number of DS0s can
be assigned from one to twenty-four, but they must
be in a contiguous block.
3 State This option is used to enable or disable the DS1 for
network interface A. Options are as follows:
•Enabled
• Disabled
4 Primary Timing Mode This option sets the primary timing mode for
network interface A. Options are as follows:
• Internal
•Line
•Through
Card: Module A ADTRAN MX3216 System MM/DD/YY hh:mm
Unacknowledged Alarms: NONE ID: Site 1 MX3216
Quick Setup
Network
1 - Timeslot Assignment : 01-24
Interface A
3 - State : Enabled
4 - Primary Timing Mode : Through
5 - Secondary Timing Mode : Line
Interface B
6 - State : Enabled
7 - Primary Timing Mode : Through
8 - Secondary Timing Mode : Internal
Selection : '?' - System Help Screen