Specifications

MX3216 System Manual
6-108 61189008L1-1B
Network Interface Menu
The Network Interface menu (see Figure 6-68) is used to set the timing and state for network
interface A and B.
NOTE
In order to use a network interface, a DS1 must be mapped from
the controller through the 3/1 cross-connect to the appropriate
module slot and DS1. Refer to the
“Provisioning Menu” on page 6-
105 or “Quick Setup Menu” on page 6-115 for more details.
Figure 6-68. Network Interface Menu
The Network Interface menu options are shown in Table 6-76.
Card: Module A ADTRAN MX3216 System MM/DD/YY hh:mm
Unacknowledged Alarms: NONE ID: Site 1 MX3216
Network Interface A
1 - Primary Timing Mode : Through
2 - Secondary Timing Mode : Through
3 - Interface State : Enabled
Selection : '?' - System Help Screen