Specifications

MX3216 System Manual
6-98 61189008L1-1B
Method Menu
The Method menu (see Figure 6-61) provides options for upgrading the firmware.
CAUTION
Resetting the active controller disrupts traffic and cause a switch
to the standby card if it is installed.
Figure 6-61. Method Menu
The Method menu options are shown in Table 6-66.
The Method menu fields are shown in Table 6-67.
Table 6-66. Method Menu Options
Option Description Function
1 Y-Modem This option is used to transfer the new application
software to the unit by Y-Modem.
2 TFTP This option displays the “TFTP Menu” on page 6-99.
This menu is used to transfer the new application
software to the unit by TFTP.
3 Reset Active Controller This option resets the active controller card. Reset-
ting the active controller card switches operation to
the standby card. In a redundant system, the
standby card updates and automatically resets.
Card: Controller A ADTRAN MX3216 System MM/DD/YY hh:mm
Unacknowledged Alarms: NONE ID: Site 1 MX3216
MX3216->Firmware Upgrade->Method
1 - Y-Modem
2 - TFTP
3 - Reset Active Controller (A)
Controller A status: Ready for transfer
Controller B status: Not available
Selection : '?' - System Help Screen