Specifications

Section 6, User Interface - Menu Descriptions
61189008L1-1B 6-89
Module A/B Alarms Log Screen
The Module A/B Alarms Log screen (see Figure 6-55) is used to review and acknowledge
alarms.
Figure 6-55. Module A/B Alarms Log Screen
The Module A/B Alarms Log screen fields are shown in Table 6-59.
Table 6-59. Module A/B Alarms Log Screen Fields
Field Description
Date This field displays the date that the alarm was initiated.
Time This field displays the time that the alarm was initiated.
Pos This field displays the position (source) of the alarm. Possible sources
are as follows:
• CA = Controller A
• CB = Controller B
•MA = Module A
•MB = Module B
Type This field displays the type of the card that originates the alarm.
Possible types are as follows:
• Controller
•Module
Port This field displays the port/interface associated with the alarm.
Card: Controller A ADTRAN MX3216 System MM/DD/YY hh:mm
Unacknowledged Alarms: NONE ID: Site 1 MX3216
Alarm Log - Module A Alarms Alarms 0 to 0 of 0 Page 1 of 1
Date Time Pos Type Port Level Description Status
---------------------------->>> END OF ALARM LOG <<<----------------------------
Inverse = Active * = Unacknowledged Chronology = Descending
(N)ext (P)rev (F)irst (L)ast (C)lear (A)cknowledge (S)elect Log