Specifications

MX3216 System Manual
6-68 61189008L1-1B
DS1 Ports Screen
The DS1 Ports screen (see Figure 6-43) displays the status of the DS1 ports.
Figure 6-43. DS1 Ports Screen
The DS1 Ports screen fields are shown in Table 6-44.
Table 6-44. DS1 Ports Screen Fields
Field Description
Status This field displays the current line status of the DSX-1 ports. The
possible states are as follows:
•OK
• TEST: Indicates the DS1 is in test mode.
• CV (Code Violation)
• ERR: Indicates there is a test pattern error.
• AIS (Alarm Indication Signal)
• LOS (Loss of Signal)
• OFF: Indicates the port is not mapped through the 3/1 cross-
connect and the transmitter is in a high-impedance mode.
Test This field displays the active test for the DSX-1 ports. Table 6-45
describes the available tests.
Card: Controller A ADTRAN MX3216 System MM/DD/YY hh:mm
Unacknowledged Alarms: NONE ID: Site 1 MX3216
MX3216->Status->DS1 Ports
Status Test
1 OFF Data Mode
2 OFF Data Mode
3 OFF Data Mode
4 OFF Data Mode
5 OFF Data Mode
6 OFF Data Mode
7 OFF Data Mode
8 OFF Data Mode
9 OFF Data Mode
10 OFF Data Mode
11 OFF Data Mode
12 OFF Data Mode
13 OFF Data Mode
14 OFF Data Mode
15 OFF Data Mode
16 OFF Data Mode
'?' - System Help Screen