Specifications

Section 6, User Interface - Menu Descriptions
61189008L1-1B 6-63
Table 6-37. Standby Card Status
Status Description
Ready This state indicates a card is ready and acting as a backup module.
Not Installed This state indicates a card is not installed in the designated slot.
Software Update This state indicates a software update is in progress.
Not Ready This state indicates a card configuration is in progress.
Not Ready - Code Mis-
match
This state indicates an active card should be reset to run new code.
Comm Failure This state indicates modules are not able to communicate with each
other.
Card Failure This state indicates a card has failed and should be replaced.
Table 6-38. Alarm Conditions
Condition Description
None This condition indicates no alarms.
Card Failure - Active Card This condition indicates an active card has failed.
Card Failure - Standby
Card
This condition indicates a standby card has failed.
Switch to Protect This condition indicates a controller card switch has occurred.
Comm Failure This condition indicates the active and standby controllers are not able
to communicate with each other.
Code Mismatch This condition indicates code versions on active and standby cards do
not match. Reset the active card to run new code.