Specifications

Section 6, User Interface - Menu Descriptions
61189008L1-1B 6-59
Change Menu
The Change menu (see Figure 6-39) is used to map connections for unmapped DS1s.
Figure 6-39. Change Menu
The Change menu options are shown in Table 6-33.
For example, to connect the DS1 Port #1 (DSX-1 #1) to the fourth DS1 in DS3 B, select DS3 B
from option 1 and enter
4 for option 2, then apply the cross-connect. Additionally, to connect
the DS1 Port #7 (DSX-1 #7) to the second DS1 in module A, select
DS1 Port from option 1 and
enter
7 for option 2, then apply the cross-connect.
Table 6-33. Change Menu Options
Option Description Function
1 Choose Group This option is used to select a group of DS1s to
connect the selected DS1. Options are as follows:
•DS1 Port
•Module A
•Module B
•DS3 A
•DS3 B
2 Choose DS1 This option is used to enter the number for the DS1
from the chosen group.
3 Apply Cross-Connect This option appears once options 1 and 2 have been
set and is used to apply the selections from options
1 and 2.
Card: Controller A ADTRAN MX3216 System MM/DD/YY hh:mm
Unacknowledged Alarms: NONE ID: Site 1 MX3216
MX3216->Quick Setup->Change
CONNECT DS1 PORT #1 TO
1 - Choose Group :
(DS3 A ... )
2 - Choose DS1 :
Selection : '?' - System Help Screen