Specifications

MX3216 System Manual
6-38 61189008L1-1B
Cross-Connect Change Menu
The Cross-Connect Change menu (see Figure 6-23) is used to map connections for unmapped
DS1s.
Figure 6-23. Cross-Connect Change Menu
The Cross-Connect Change menu options are shown in Table 6-16.
Table 6-16. Cross-Connect Change Menu Options
Option Description Function
1 Choose Group This option is used to select the group for the cross-
connect. Options are as follows:
•DS1 Port
•Module A
•Module B
•DS3 A
•DS3 B
2 Choose DS1 This option is used to enter the number for the DS1
that is to be connected.
3 Apply Cross-Connect This option appears once options 1 and 2 have been
defined. Selecting this option applies the cross-
connect.
Card: Controller A ADTRAN MX3216 System MM/DD/YY hh:mm
Unacknowledged Alarms: NONE ID: Site 1 MX3216
MX3216->Provisioning->Cross-Connect->Change
CONNECT DS3 A T1 #1 TO
1 - Choose Group :
(DS3 A ... )
2 - Choose DS1 :
Selection : '?' - System Help Screen