Specifications

Section 6, User Interface - Menu Descriptions
61189008L1-1B 6-37
Table 6-15. Drops View Options
Option Description Function
1–16 DS1 1–16 If currently mapped, this option displays the
Confirm Unmap/Map screen that provides a yes/no
option to unmap the selected cross-connect.
If currently unmapped, this option displays the
“Cross-Connect Change Menu” on page 6-38.
17–20 Module A 1–4 These options appear for the DS1 ports used by a
module installed in slot
A.
If currently mapped, this option displays the
Confirm Unmap/Map screen that provides a yes/no
option to unmap the selected cross-connect.
If currently unmapped, this option displays the
“Cross-Connect Change Menu” on page 6-38.
21–24 Module B 1–4 These options appear for the DS1 ports used by a
module installed in slot
B.
If currently mapped, this option displays the
Confirm Unmap/Map screen that provides a yes/no
option to unmap the selected cross-connect.
If currently unmapped, this option displays the
“Cross-Connect Change Menu” on page 6-38.
25 Restore Map to Factory Defaults This option is used to restore the cross-connect map
to the factory defaults (i.e., DS3 A mapped to DS3
B, no DS1 drops).