User manual

Basic Features ADTRAN IP 700 Series Phone User Manual

Muting Calls

To mute a call any time during an active call, use the following steps:

1. Press the Mute function key.

2. The LED flashes red indicating the call has been muted.

3. Press the Mute function key again to cancel.

Using the Navigation Bar

The IP 706 and IP 712 phone settings are accessed through the various menus presented on the LCD

display. As previously discussed, there are menus associated with soft keys (displayed across the bottom of

the LCD), as well as a main menu that is displayed when the Menu key in the center of the phone’s face is

pressed.

The navigation bar enables you to scroll through the menus presented on the LCD display, as well as make

selections. See Table 4 below for a description of each button on the navigation bar.

Table 4. Menu Navigation Bar

While mute is enabled, you can still hear the caller’s voice but they cannot hear

any audio from your side of the conversation.

Function

Button

Description Note

Scrolls up the list.

In an idle menu state, the up arrow also serves

as a shortcut to the user’s Personal Contacts

directory.

Scrolls down the list.

In an idle menu state, the down arrow also

serves as a shortcut to the Missed Calls Log.

Scrolls to the right.

In an idle menu state, the right arrow also

serves as a shortcut to the Placed Calls Log.

Scrolls to the left.

In an idle menu state, the left arrow also serves

as a shortcut to the Incoming Calls Log.

OK Selects the highlighted menu item.

MENU Displays the Main menu on the LCD.

CANCEL

Cancels the selection and returns to

idle menu state.

CANCEL

Personal Contacts

Missed Calls

Placed Calls

Incoming Calls