User manual

Assembly and Installation ADTRAN IP 700 Series Phone User Manual

Connecting the Handset and Headset

1. Using the provided 9-foot coiled handset cord, insert one end into the jack in the bottom of the

handset. Insert the other end into the jack on the back of the phone console labeled with the

handset icon as shown in Figure 3 below. Place the handset on the handset cradle once installed.

2. Optional. Connect your headset to the jack in the back of the phone console labeled with the

headset icon as shown in Figure 3 below. There are many types of headsets that can be used with

the IP 706 or IP 712 phone. For a list of compatible headsets for the IP phones, refer to the

ADTRAN website at www.adtran.com/phones

. Once the headset is connected, the headset feature

is ready to use.

Figure 3. Connecting the Handset and Headset

Equipment Installation

Only trained and qualified service personnel should be allowed to install, replace,

or service this equipment. The equipment must be placed indoors and connected to

indoor networks only. Failure to follow the installation guide instructions may void

warranty.

Optional

Headset

Handset