Instruction manual

Appendix A. Configuration and Line Parameters ADTRAN IP 700 Series Phone Administrator Guide
74 Copyright © 2011 ADTRAN, Inc. 6AOSAG0001-31A
SetupPassword ASCII
String
Customizes the MD5 hash of the
password that is entered for restricted
administration settings on the phone. This
password is saved in flash memory after a
value has been received in a config file so
it can be enforced on subsequent reboots.
It is cleared by the restore factory defaults
command.
Default: 1234
Config File
ServerType FTP, HTTP,
HTTPS,
TFTP
Sets the server type to be configured. Web Interface
SipKeepAlive True or
False
Enables (true) or disables (false) session
timers.
Default: True
Config File
Web Interface
SipTimerBfh 3 to 32 Indicates the number of seconds before
the SIP B, F, and H timers expire. This
parameter impacts the server failover time.
Default: 32
Config File
Web Interface
SipUdpPort 1 to 65536 Sets the port used to receive SIP UDP
traffic.
Default: 5060
Config File
Web Interface
SiteOption Up to 3
ASCII
Characters
Sets the option number that the phone will
request during DHCP transactions. If a
value other than the default option 157 is
set in a configuration file, the phone will re-
initiate DHCP procedures using the new
option.
Valid range is between 128 and 254.
Default: 157
Config File
Web Interface
Table 12. Configuration Parameters (Continued)
Parameter Value Type Description Sources